imapext-2007: 2366b362676d Makefile

310 a32 a41 a52 aix bs3 bsi d-g d54 do4 drs epx ga4 gas gh9 ghp ghs go5 gsc gsg gso gul h11 hpp hpx lnp lyn mct mnt nec nto nxt nx3 osf os4 ptx qnx sc5 sco sgi sg6 shp sl4 sl5 slx snx soc sol sos uw2: an

311 $(BUILD) BUILDTYPE=$@

312

313 # If you use sv4, you may find that it works to move it to use the an process.

314 # If so, you probably will want to delete the "-Dconst=" from the sv4 CFLAGS in

315 # the c-client Makefile.

316

317 aos art asv aux bsd cvx dpx dyn isc pyr sv4 ult vul vu2: ua

318 $(BUILD) BUILDTYPE=$@

319

320

321 # Knotheads moved Kerberos and SSL locations on these platforms

322

323 # Paul Vixie claims that all FreeBSD versions have working IPv6

324

325 bsf: an

326 $(TOUCH) ip6

327 $(BUILD) BUILDTYPE=$@ IP=$(IP6) \

328 PASSWDTYPE=pam \

329 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/etc/ssl/certs SSLKEYS=/etc/ssl/private GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMLDFLAGS=-lpam"

330

331 # I assume that Theo did the right thing for IPv6. OpenBSD does not have PAM.

332

333 bso: an

334 $(TOUCH) ip6

335 $(BUILD) BUILDTYPE=$@ IP=$(IP6) \

336 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/etc/ssl SSLKEYS=/etc/ssl/private GSSINCLUDE=/usr/include GSSLIB=/usr/lib"

337

338 # Info from Joel Reicher about NetBSD SSL paths. I assume it has PAM because pam is in NetBSD sources...

339

340 neb: an

341 $(TOUCH) ip6

342 $(BUILD) BUILDTYPE=$@ IP=$(IP6) \

343 PASSWDTYPE=pam \

344 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/etc/openssl/certs SSLKEYS=/etc/openssl/private GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMLDFLAGS=-lpam"

345

346 cyg: an

347 $(BUILD) BUILDTYPE=cyg \

348 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/usr/ssl/certs SSLKEYS=/usr/ssl/certs"

349

350 gcs: an

351 $(BUILD) BUILDTYPE=gso \

352 SPECIALS="SSLINCLUDE=/opt/csw/include/openssl SSLLIB=/opt/csw/lib SSLCERTS=/opt/csw/ssl/certs SSLKEYS=/opt/csw/ssl/certs"

353

354 ldb: an

355 $(BUILD) BUILDTYPE=lnp IP=$(IP6) \

356 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/etc/ssl/certs SSLKEYS=/etc/ssl/private GSSINCLUDE=/usr/include GSSLIB=/usr/lib MAILSPOOL=/var/mail"

357

358 lfd: an

359 $(BUILD) BUILDTYPE=lnp IP=$(IP6) \

360 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/etc/pki/tls/certs SSLKEYS=/etc/pki/tls/private GSSDIR=/usr/kerberos"

361

362 ln8: an

363 $(TOUCH) ip6

364 $(BUILD) BUILDTYPE=slx IP=$(IP6) \

365 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/usr/lib/ssl/certs MAILSPOOL=/var/mail"

366

367

368 # RHE5 does not have the IPv6 bug

369

370 lr5: an

371 $(TOUCH) ip6

372 $(BUILD) BUILDTYPE=lnp IP=$(IP6) \

373 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/etc/pki/tls/certs SSLKEYS=/etc/pki/tls/private GSSDIR=/usr/kerberos"

374

375 lmd: an

376 $(BUILD) BUILDTYPE=lnp IP=$(IP6) \

377 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/usr/lib/ssl/certs SSLKEYS=/usr/lib/ssl/private GSSINCLUDE=/usr/include GSSLIB=/usr/lib"

378

379 # RHE3 definitely has the IPv6 bug

380

381 lrh: lrhok an

382 $(BUILD) BUILDTYPE=lnp IP=$(IP6) \

383 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/usr/share/ssl/certs SSLKEYS=/usr/share/ssl/private GSSDIR=/usr/kerberos"

384

385 lrhok:

386 @$(SH) -c '(test ! -d /etc/pki/tls ) || make lrhwarn'

387 @$(TOUCH) lrhok

388

389 lrhwarn:

390 @echo You are building for OLD versions of RedHat Linux. This build

391 @echo is NOT suitable for RedHat Enterprise 5, which stores SSL/TLS

392 @echo certificates and keys in /etc/pki/tls rather than /usr/share/ssl.

393 @echo If you want to build for modern RedHat Linux, you should use

394 @echo make lr5 instead.

395 @echo Do you want to continue this build? Type y or n please:

396 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac'

397 @echo OK, I will remember that you really want to build for old

398 @echo RedHat Linux. You will not see this message again.

399 @echo If you realize that you really wanted to build for modern

400 @echo RedHat Linux, then do the following commands:

401 @echo % rm lrhok

402 @echo % make clean

403 @echo % make lr5

404

405 lsu: an

406 $(BUILD) BUILDTYPE=lnp IP=$(IP6) \

407 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/usr/share/ssl/certs SSLKEYS=/usr/share/ssl/private GSSDIR=/usr/kerberos"

408

409 # iToy does not have Kerberos or PAM. It doesn't have a

410 # /System/Library/OpenSSL directory either, but the libcrypto shared library

411 # has these locations so this is what we will use.

412

413 osi: an

414 $(TOUCH) ip6

415 $(BUILD) BUILDTYPE=osx IP=$(IP6) CC=arm-apple-darwin-gcc \

416 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/System/Library/OpenSSL/certs SSLKEYS=/System/Library/OpenSSL/private"

417

418 oxp: an

419 $(TOUCH) ip6

420 $(BUILD) BUILDTYPE=osx IP=$(IP6) EXTRAAUTHENTICATORS="$(EXTRAAUTHENTICATORS) gss" \

421 PASSWDTYPE=pam \

422 EXTRACFLAGS="$(EXTRACFLAGS) -DMAC_OSX_KLUDGE=1" \

423 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/System/Library/OpenSSL/certs SSLKEYS=/System/Library/OpenSSL/private GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMDLFLAGS=-lpam"

424

425 osx: osxok an

426 $(TOUCH) ip6

427 $(BUILD) BUILDTYPE=$@ IP=$(IP6) EXTRAAUTHENTICATORS="$(EXTRAAUTHENTICATORS) gss" \

428 SPECIALS="SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLCERTS=/System/Library/OpenSSL/certs SSLKEYS=/System/Library/OpenSSL/private GSSINCLUDE=/usr/include GSSLIB=/usr/lib"

429

430 osxok:

431 @$(SH) -c '(test ! -f /usr/include/pam/pam_appl.h ) || make osxwarn'

432 @$(TOUCH) osxok

433

434 osxwarn:

435 @echo You are building for OLD versions of Mac OS X. This build is

436 @echo NOT suitable for modern versions of Mac OS X, such as Tiger,

437 @echo which use PAM-based authentication. If you want to build for

438 @echo modern Mac OS X, you should use make oxp instead.

439 @echo Do you want to continue this build? Type y or n please:

440 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac'

441 @echo OK, I will remember that you really want to build for old

442 @echo Mac OS X. You will not see this message again.

443 @echo If you realize that you really wanted to build for modern

444 @echo Mac OS X, then do the following commands:

445 @echo % rm osxok

446 @echo % make clean

447 @echo % make oxp

448

449

450 # Linux shadow password support doesn't build on traditional systems, but most

451 # Linux systems are shadow these days.

452

453 lnx: lnxnul an

454 $(BUILD) BUILDTYPE=$@

455

456 lnxnul:

457 @$(SH) -c '(test $(PASSWDTYPE) = nul) || make lnxok'

458

459 lnxok:

460 @echo You are building for traditional Linux. Most modern Linux

461 @echo systems require that you build using make slx.

462 @echo Do you want to continue this build? Type y or n please:

463 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac'

464 @echo OK, I will remember that you really want to build for

465 @echo traditional Linux. You will not see this message again.

466 @echo If you discover that you can not log in to the POP and IMAP

467 @echo servers, then do the following commands:

468 @echo % rm lnxok

469 @echo % make clean

470 @echo % make slx

471 @echo If slx does not work, try sl4 or sl5. Be sure to do a

472 @echo make clean between each try!

473 @$(TOUCH) lnxok

474

475

476 # SUN-OS C compiler makes you load libdl by hand...

477

478 ssn sun: sunok suntools ua

479 $(BUILD) BUILDTYPE=$@

480

481 suntools:

482 $(CD) tools;$(MAKE) LDFLAGS=-ldl

483

484 gsu: sunok an

485 $(BUILD) BUILDTYPE=$@

486

487 s40: sunok ua

488 $(BUILD) BUILDTYPE=$@

489

490 sunok:

491 @echo You are building for the old BSD-based SUN-OS. This is NOT

492 @echo the modern SVR4-based Solaris. If you want to build for

493 @echo Solaris, you should use make gso or make sol or make soc. Do

494 @echo you want to continue this build? Type y or n please:

495 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac'

496 @echo OK, I will remember that you really want to build for the old

497 @echo BSD-based SUN-OS. You will not see this message again.

498 @echo If the build fails and you realize that you really wanted to

499 @echo build for Solaris, then do the following commands:

500 @echo % rm sunok

501 @echo % make clean

502 @echo % make gso

503 @echo If gso does not work, try sol. Be sure to do a make clean

504 @echo between each try!

505 @$(TOUCH) sunok

506

507

508 # SVR2 doesn't have symbolic links (at least my SVR2 system doesn't)

509

510 sv2:

511 $(MAKE) ua LN=ln

512 $(BUILD) BUILDTYPE=$@ LN=ln

513

514 # Hard links don't quite work right in SUA, and there don't seem to be any

515 # SSL includes. However, IPv6 works.

516

517 sua:

518 $(TOUCH) ip6 sslnone

519 $(MAKE) an LN=cp SSLTYPE=none

520 $(BUILD) BUILDTYPE=$@ LN=cp IP=$(IP6) SSLTYPE=none

521

522

523 # Pine port names, not distinguished in c-client

524

525 bs2: an

526 $(BUILD) BUILDTYPE=bsi

527

528 pt1: an

529 $(BUILD) BUILDTYPE=ptx

530

531

532 # Compatibility

533

534 hxd:

535 $(BUILD) BUILDTYPE=hpx PASSWDTYPE=dce

536

537 # Amiga

538

539 ami am2 ama amn:

540 $(MAKE) an LN=cp SYSTEM=amiga

541 $(BUILD) BUILDTYPE=$@ LN=cp

542

543

544 # Courtesy entries for Microsoft systems

545

546 nt:

547 nmake /nologo /f makefile.nt

548

549 ntk:

550 nmake /nologo /f makefile.ntk

551

552 w2k:

553 nmake /nologo /f makefile.w2k

554

555 wce:

556 nmake /nologo /f makefile.wce

557

558

559 # SSL build choices

560

561 sslnopwd sslunix.nopwd sslsco.nopwd:

562 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

563 @echo + Building in full compliance with RFC 3501 security

564 @echo + requirements:

565 @echo ++ TLS/SSL encryption is supported

566 @echo ++ Unencrypted plaintext passwords are prohibited

567 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

568

569 sslunix sslsco:

570 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

571 @echo + Building in PARTIAL compliance with RFC 3501 security

572 @echo + requirements:

573 @echo + Compliant:

574 @echo ++ TLS/SSL encryption is supported

575 @echo + Non-compliant:

576 @echo ++ Unencrypted plaintext passwords are permitted

577 @echo +

578 @echo + In order to rectify this problem, you MUST build with:

579 @echo ++ SSLTYPE=$(SSLTYPE).nopwd

580 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

581 @echo

582 @echo Do you want to continue this build anyway? Type y or n please:

583 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make nounenc;exit 1);; esac'

584

585 nounenc:

586 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

587 @echo + At your request, this build with unencrypted authentication has

588 @echo + been CANCELLED.

589 @echo + You must start over with a new make command.

590 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

591

592

593 sslnone:

594 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

595 @echo + Building in NON-COMPLIANCE with RFC 3501 security requirements:

596 @echo + Non-compliant:

597 @echo ++ TLS/SSL encryption is NOT supported

598 @echo ++ Unencrypted plaintext passwords are permitted

599 @echo +

600 @echo + In order to rectify this problem, you MUST build with:

601 @echo ++ SSLTYPE=nopwd

602 @echo + You must also have OpenSSL or equivalent installed.

603 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

604 @echo

605 @echo Do you want to continue this build anyway? Type y or n please:

606 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make nonossl;exit 1);; esac'

607

608 nonossl:

609 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

610 @echo + At your request, this build with no TLS/SSL support has been

611 @echo + CANCELLED.

612 @echo + You must start over with a new make command.

613 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

614

615

616 # IP build choices

617

618 ip4:

619 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

620 @echo + Building with IPv4 support

621 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

622

623 ip6:

624 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

625 @echo + Building with IPv6 support

626 @echo +

627 @echo + NOTE: Some versions of glibc have a bug in the getaddrinfo

628 @echo + call which does DNS name resolution. This bug causes host

629 @echo + names to be canonicalized incorrectly, as well as doing an

630 @echo + unnecessary and performance-sapping reverse DNS call. This

631 @echo + problem does not affect the IPv4 gethostbyname call.

632 @echo +

633 @echo + getaddrinfo works properly on Mac OS X and Windows. However,

634 @echo + the problem has been observed on some Linux systems.

635 @echo +

636 @echo + If you answer n to the following question the build will be

637 @echo + cancelled and you must rebuild. If you did not specify IPv6

638 @echo + yourself, try adding IP6=4 to the make command line.

639 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

640 @echo

641 @echo Do you want to build with IPv6 anyway? Type y or n please:

642 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make noip6;exit 1);; esac'

643 @echo OK, I will remember that you really want to build with IPv6.

644 @echo You will not see this message again.

645 @$(TOUCH) ip6

646

647 noip6:

648 $(MAKE) clean

649 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

650 @echo + At your request, this build with IPv6 has been CANCELLED.

651 @echo + You must start over with a new make command.

652 @echo +

653 @echo + If you wish to rebuild without IPv6 support, do one of the

654 @echo + following:

655 @echo +

656 @echo + 1. If you specified IP=6 on the make command line, omit it.

657 @echo +

658 @echo + 2. Some of the Linux builds automatically select IPv6. If

659 @echo + you choose one of those builds, add IP6=4 to the make command

660 @echo + line. Note that this is IP6=4, not IP=4.

661 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

662

663 # C compiler types

664

665 an ua:

666 @$(MAKE) ssl$(SSLTYPE)

667 @echo Applying $@ process to sources...

668 $(TOOLS)/$@ "$(LN)" src/c-client c-client

669 $(TOOLS)/$@ "$(LN)" src/ansilib c-client

670 $(TOOLS)/$@ "$(LN)" src/charset c-client

671 $(TOOLS)/$@ "$(LN)" src/osdep/$(SYSTEM) c-client

672 $(TOOLS)/$@ "$(LN)" src/mtest mtest

673 $(TOOLS)/$@ "$(LN)" src/ipopd ipopd

674 $(TOOLS)/$@ "$(LN)" src/imapd imapd

675 $(TOOLS)/$@ "$(LN)" src/mailutil mailutil

676 $(TOOLS)/$@ "$(LN)" src/mlock mlock

677 $(TOOLS)/$@ "$(LN)" src/dmail dmail

678 $(TOOLS)/$@ "$(LN)" src/tmail tmail

679 $(LN) $(TOOLS)/$@ .

680

681 build: OSTYPE rebuild rebuildclean bundled

682

683 OSTYPE:

684 @$(MAKE) ip$(IP)

685 @echo Building c-client for $(BUILDTYPE)...

686 @$(TOUCH) SPECIALS

687 echo `$(CAT) SPECIALS` $(EXTRASPECIALS) > c-client/SPECIALS

688 $(CD) c-client;$(MAKE) $(BUILDTYPE) EXTRACFLAGS='$(EXTRACFLAGS)'\

689 EXTRALDFLAGS='$(EXTRALDFLAGS)'\

690 EXTRADRIVERS='$(EXTRADRIVERS)'\

691 EXTRAAUTHENTICATORS='$(EXTRAAUTHENTICATORS)'\

692 PASSWDTYPE=$(PASSWDTYPE) SSLTYPE=$(SSLTYPE) IP=$(IP)\

693 $(SPECIALS) $(EXTRASPECIALS)

694 echo $(BUILDTYPE) > OSTYPE

695 $(TOUCH) rebuild

696

697 rebuild:

698 @$(SH) -c '(test $(BUILDTYPE) = rebuild -o $(BUILDTYPE) = `$(CAT) OSTYPE`) || (echo Already built for `$(CAT) OSTYPE` -- you must do \"make clean\" first && exit 1)'

699 @echo Rebuilding c-client for `$(CAT) OSTYPE`...

700 @$(TOUCH) SPECIALS

701 $(CD) c-client;$(MAKE) all CC=`$(CAT) CCTYPE` \

702 CFLAGS="`$(CAT) CFLAGS`" `$(CAT) SPECIALS`

703

704 rebuildclean:

705 $(SH) -c '$(RM) rebuild || true'

706

707 bundled:

708 @echo Building bundled tools...

709 $(CD) mtest;$(MAKE)

710 $(CD) ipopd;$(MAKE)